Esc - Escape, Go Back; Sto - Store Value Or Reading - Arbiter Systems 928A User Manual

ESC – Escape, Go Back
Press ESC to leave a specific menu or go back in key-
strokes to the previous screen. For example, if you are
viewing the Main Menu, press ESC to leave the Main
Menu and view Channel Configuration.
STO – Store Value or Reading
Use STO to
1. Write to flash memory the current measured val-
ues at Channel A and B as shown on the display.
2. Save values during configuration of functions
(e.g. a CT ratio or phase offset and moving to
the next item). Use STO in lieu of highlighting
STOre And Exit
When Recording Data
The Model 928A stores records according to the date
and time running in the internal clock. Before mea-
suring, check the clock for the correct time in the case
that it has drifted or was inadvertently changed. See
TIME and DATE, on pages 20 and 21, for more infor-
mation on setting the time and date.
When Configuring Functions
To configure settings in the 928A, generally you will
press 2nd MENU while in some measurement mode
(e.g. VI). After changing any settings, press STO
to install the new value(s) in memory and leave that
menu. Also, highlight
to perform the same function as STO.
and pressing ENT.
STOre And Exit then ENT
19