Table of Contents
Advertisement
immediate progress.
Uploading New Firmware
Mlink provides a convenient method for uploading new
firmware to the 928A, and optimizing performance.
When new firmware versions become available, obtain
them from the Arbiter web site or by contacting Ar-
biter Systems technical support.
1. Start Mlink and select Main
The firmware file is in a zipped format and Mlink
automatically unzips it.
2. Select the file and click OPEN and you should
see the progress as shown in Figure 14. The 928A
displays "FLASH PROGRAM IN PROGRESS"
during the installation. Click OK when finished.
Figure 14: Upload Firmware Window
Upload Firmware.
82
Advertisement
Table of Contents
Need help?
Do you have a question about the 928A and is the answer not in the manual?