Powering On The Switch - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches
6) On the Settings tab, set the emulation to VT100 and click OK.

Powering on the switch

Before powering on the switch, verify that the following conditions are met:
The power cord is properly connected.

The input power voltage meets the requirement of the switch.

The console cable is properly connected.

The configuration terminal (a PC, for example) has started, and its serial port settings

are consistent with the console port settings on the switch.
Power on the switch.During the startup process, you can access Boot ROM menus to
perform tasks such as software upgrade and file management. The Boot ROM interface
and menu options differ with software versions. For more information about Boot ROM
menu options, see the software-matching release notes for the device.
Setting terminal emulation in Switch Properties dialog box
4-5
4 Accessing the switch for the first time