Using Ftp To Upgrade Software Through The Management Ethernet Port - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Enter your choice(0-8):0

6.5.4 Using FTP to upgrade software through the management Ethernet port

1) Enter 1 in the Boot menu to access the file transfer protocol submenu.
1. Set TFTP protocol parameters
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):
2) Enter 2 to set the FTP parameters.
Load File name :update.ipe
Server IP address :192.168.0.3
Local IP address :192.168.0.2
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
FTP User Name :switch
FTP User Password :123
Load File Name
Server IP Address
Local IP Address
Subnet Mask
Table 6-3 FTP parameter description
Item
Name of the file to download (for example, update.ipe).
IP address of the FTP server (for example, 192.168.0.3).
IP address of the switch (for example, 192.168.0.2).
Subnet mask of the switch (for example, 255.255.255.0).
Description
6-18
6 Upgrading software