Hot Swappable Fan Trays - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches
LED status
Steady green
Blinking green
Steady red
Red/Green
blinking alternatively
Blinking red
Off
PSR450-12A-N has a status LED on its front panel. The following table lists the LED status
and description.
LED status
Steady green
Blinking green
Steady red
Blinking red
Off

Hot swappable fan trays

A fan has LSPM5FANSA and LSPM5FANSB for QX-S6648XP-6Q, QX-S6648XT-6Q, while
a fan has LSWM3HFANSC and LSWM3HFANSCB for QX-S6632QP.
Item
LSPM5FANSA (for QX-S6648XP-6Q and QX-S6648XT-6Q)
Fans(W x D x H)
Fan speed
Max airflow
The power module operates properly, and is in the active state.
The power module operates properly, and is in the standby state.
The power module fails or enters the protected state.
The power module alarms. The power module encounters exceptional power output
problems, for example, over-voltage output, under-voltage output, over-current
output, over-load, and over-heat, but does not enter the protected state.
The power module has no power input. The switch has two power modules. If one
has power input, but the other does not, the status LED of the power module that
has no power input blinks red.
The power modules have no power input.
The power module operates properly, and is in the active state.
The power module operates properly, and is in the standby state.
The power module fails or enters the protected state.
The power module has no power input. The switch has two power modules. If one
has power input, but the other does not, the status LED of the power module that
has no power input blinks red.
The power modules have no power input.
40.0 x 104.6 x 40.6 mm
20000R.P.M
20 CFM
9-4
9 Appendix B FRUs and compatibility matrixes
Description
Description
Specifications