Table of Contents
Advertisement
Installation Guide
QX-S6600 Series Ethernet Switches
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Enter your choice(0-8):
3)
Enter 7 at the prompt.
Enter your choice(0-8):7
4)
When indicating "The current setting is skipping configuration file when reboot.",
please change the setting. Enter your Y at the prompt.
The current setting is skipping configuration file when reboot.
Are you sure you want to run current configuration file when reboot? Yes or No
(Y/N):Y
Setting...Done!
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
7 Maintenance and troubleshooting
7-5
Advertisement
Chapters
Table of Contents
