NEC QX-S6648XP-6Q Installation Manual page 85

Installation Guide
QX-S6600 Series Ethernet Switches
Gateway IP Address
FTP User Name
FTP User Password
 NOTE:
To use the default setting for a field, press Enter without entering any value.

If the switch and the server are on different subnets, you must specify a gateway

address for the switch.
3) Enter all required parameters, and enter Y to confirm the settings. The following
prompt appears:
Are you sure to download file to flash? Yes or No (Y/N):Y
Enter Y to start downloading the image file. To return to the Boot menu, enter N.
4)
Loading......................................................................
.............................................................................
.............................................................................
................................................................Done!
Enter the M (main), B (backup), or N (none) attribute for the images. In this example,
5)
assign the main attribute to the images.
Please input the file attribute (Main/Backup/None) M
The boot.bin image is self-decompressing...
Free space: 534980608 bytes
Writing
flash...................................................................
.............................................................................
...................................................................
Done!
The system.bin image is self-decompressing...
Free space: 525981696 bytes
Writing
Item
IP address of the gateway (in this example, no gateway is required
because the server and the switch are on the same subnet).
Username for accessing the FTP server, which must be the same as
configured on the FTP server.
Password for accessing the FTP server, which must be the same as
configured on the FTP server.
Description
6-19
6 Upgrading software