Verifying The Installation - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches
 NOTE:
Please check the RX/TX position of SFP/SFP+/QSFP+ module is connected correctly. If the LED of the SFP
port does not turn on, the connected port(RX/TX) may be wrong.

Verifying the installation

After you complete the installation, verify that:
There is enough space for heat dissipation around the switch, and the rack is stable.

The grounding cable is securely connected.

The correct power source is used.

The power cords are properly connected.

All the interface cables are cabled indoors. If any cable is routed outdoors, verify that

the socket strip with lightning protection and lightning arresters for network ports have
been properly connected.
SFP/SFP+/QSFP+ module
LC connector
(1)
(1) TX
3-26
(2)
(2) RX
3 Installing the switch