Table of Contents
Advertisement
Installation Guide
QX-S6600 Series Ethernet Switches
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power module
3.5.2 Connecting the LSVM3DC650 power module
1)
Unpack the DC power cord, identify the plug for connecting to the power module,
orient the plug with the power receptacle on the power module, and insert the plug into
the receptacle (see Figure 3-24). The receptacle is foolproof. If you cannot insert the
plug into the receptacle, re-orient the plug rather than use excessive force to push it in.
2)
Use a cable tie to secure the power cord to the handle of the power module, as shown
in Figure 3-23.
3)
Connect the other end of the power cord to the DC power source.
Connecting the LSVM3AC650 power module
Connecting the LSVM3DC650 power module
3-23
3 Installing the switch
Advertisement
Chapters
Table of Contents
