Rack-Mounting Procedures At A Glance; Attaching The Mounting Brackets, Chassis Rails, And Grounding Cable To The Chassis3-3 - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches

3.1.3 Rack-mounting procedures at a glance

Identify the mounting
position (front or
rear) for the rack
mounting brackets
 NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate location,
and attach the switch to the rack with the mounting brackets.
3.1.4 Attaching the mounting brackets, chassis rails, and grounding cable to
the chassis
Each of the QX-S6600 Series Ethernet Switches has one front mounting position (near the
network ports) and one rear mounting position (near the power modules).
The QX-S6632QP provide three grounding points: primary grounding point (with a
grounding sign), auxiliary grounding point 1, and auxiliary grounding point 2. The
QX-S6648XP-6Q and QX-S6648XT-6Q each provide two grounding points: primary
grounding point (with a grounding sign) and auxiliary grounding point 1.
The mounting brackets and chassis rails installation procedures are the same for the
QX-S6648XP-6Q, QX-S6648XT-6Q and QX-S6632QP switches.
(1) Auxiliary grounding point 2
Attach the chassis
Attach the mounting
rails to the two
brackets to the two
sides of the switch
sides of the switch
Mounting and grounding positions on the QX-S6632QP
Rack-mounting procedure
Connect the
grounding cable to a
grounding point
(2) Power module-side mounting position
3-3
3 Installing the switch
Attach the Attach the
slide rails to switch to
the rack the rack