NEC QX-S6648XP-6Q Installation Manual page 104

Installation Guide
QX-S6600 Series Ethernet Switches
0 -rw-
1 -rw-
1 -rw-
2 -rw-
3 -rw-
524288 KB total (306340 KB free)
2) When starting, to confirm the read file, please use the display startup command.
<Switch>display startup
MainBoard:
Current startup saved-configuration file: config2.cfg
Next main startup saved-configuration file: config2.cfg
Next backup startup saved-configuration file: NULL
3) To specify a next-startup configuration file, perform the following task in user view. For
example, config1.cfg.
<Switch>startup saved-configuration config1.cfg
Please wait...... Done.
4) When starting next time, config1.cfg is read. Uses the display startup command to
verify.
<Switch>display startup
MainBoard:
Current startup saved-configuration file: config2.cfg
Next main startup saved-configuration file: config1.cfg
Next backup startup saved-configuration file: NULL
II. Check the startup mode
1) Power on or reboot the switch.
2) Enter the Boot ROM menu
EXTENDED BOOT MENU
129366016 Feb 15 2018 04:53:30
5321 Jan 01 2011 00:40:36
5321 Jan 01 2011 00:40:36
18098176 Jan 02 2011 23:45:08
111260672 Jan 02 2011 23:48:15
7 Maintenance and troubleshooting
qx-s6600-v712.ipe
config1.cfg
config2.cfg
qx-s6600-boot-v712.bin
qx-s6600-system-v712.bin
7-4