Table of Contents
Advertisement
Installation Guide
QX-S6600 Series Ethernet Switches
To set terminal parameters, for example, on a Windows XP HyperTerminal:
1)
Select Start > All Programs > Accessories > Communications > HyperTerminal. The
Connection Description dialog box appears.
2)
Enter the name of the new connection in the Name field and click OK.
3)
Select the serial port to be used from the Connect using list, and click OK.
4)
Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow
control to None, and click OK.
Connection description
Setting the serial port used by the HyperTerminal connection
4-3
4 Accessing the switch for the first time
Advertisement
Chapters
Table of Contents
