Wiring Of Com Port Terminal Block; Suitable Wires And Tools - Panasonic FP7 User Manual

2.2 Wiring of COM Port Terminal Block

2.2.1 Suitable Wires and Tools

A screw-down connection type for terminal block is used for the communication port. Use the
following items for wiring.
 Suitable wires (strand wire)
Size
AWG #28 to 16
 Pole terminal with a compatible insulation sleeve
If a pole terminal is being used, the following models should be used.
Manufacturer
Phoenix Contact
 Pressure welding tool for pole terminals
Manufacturer
Phoenix Contact
Screwdriver for terminal block
To tighten the terminals, use a screwdriver by Phoenix Contact (model No. SZS 0.4 x 2.5,
product No. 1205037, blade size 0.4 x 2.5) or our screwdriver (part No. AFP0806). The
tightening torque should be 0.22 to 0.25 N·m.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Nominal cross-sectional area
2 2
0.08 mm to 1.25 mm
Cross-
sectional Size
area
2
0.25 mm AWG #24
2
0.34 mm AWG #22
2
0.50 mm AWG #20
2
0.75 mm AWG #18
2
1.00 mm AWG #18
Model no.
Part no.
CRIMPFOX 6
2.2 Wiring of COM Port Terminal Block
Part no.
With insulating Without insulating
sleeve sleeve
AI 0.25-6 BU A 0.25-7
AI 0.34-6 TQ A 0.34-7
AI 0.5-6 WH A 0.5-6
AI 0.75-6 GY A 0.75-6
- A 1-6
Product no.
1212034
2-3