List Of Mewtocol / Mewtocol7 Supporting Commands; List Of Mewtocol Commands; List Of Mewtocol7 Commands - Panasonic FP7 User Manual

5.2 List of MEWTOCOL / MEWTOCOL7 Supporting Commands

5.2.1 List of MEWTOCOL Commands

 Commands to be used
Type of instruction
Read contact area
Write contact area
Read data area
Write data area
Register or Reset
contacts monitored
Register or Reset
data monitored
Monitoring start
Preset contact area
(fill command)
Preset data area
(fill command)
Read the status of PLC
Abort
(Note) Some devices are not accessible due to format restrictions of MEWTOCOL-COM communication commands.

5.2.2 List of MEWTOCOL7 Commands

 Commands to be used
Type of instruction
Read data area
Write data area
REFERENCE

For details of MEWTOCOL commands, please see 8.2 MEWTOCOL-COM
Format8.3 MEWTOCOL7-COM Format.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
5.2 List of MEWTOCOL / MEWTOCOL7 Supporting Commands
Code
RC Reads ON/OFF status of contact.
(RCS) - Specifies only one point.
(RCP) - Specifies multiple contacts.
(RCC) - Specifies a range in word units.
WC Turns ON or OFF the contact.
(WCS) - Specifies only one point.
(WCP) - Specifies multiple contacts.
(WCC) - Specifies a range in word units.
RD Reads the contents of a data area.
WD Writes data to a data area.
MC Registers the contact to be monitored.
MD Registers the data to be monitored.
MG Monitors a registered contact or data using MC and MD.
SC Embeds the area of a specified range in a 16-point on/off pattern.
SD Writes the same contents to the data area of a specified range.
Reads the specifications of the programmable controller and error
RT
codes if an error occurs.
AB Aborts reception of multiple frame responses before completion.
Code
MMRD Reads the contents of a data area.
MMWT Writes data to a data area.
Description
Description
5-3