List Of Setting Items - Panasonic FP7 User Manual

4.2.2 List of Setting Items

 List of setting items (COM1 settings)
Setting items
Communication mode
Station no.
Baud rate
Data length
Parity
Stop bit
RS/CS
Send waiting time
Start code STX
Terminator setting
Terminator judgment time
Modem initialization
 List of setting items (PLC link settings)
Setting items
Memory block numbers for link relays and
link registers to be used
Maximum station no. to be used for PLC
link
Range of link relays used
Range of link registers used
Starting no. for link relay send area
Size of link relay send area
Starting No. for link register send area
Size of link register send area
REFERENCE
For details of station no. and PLC link settings, please see explanation on the next
page onward.
NOTE

When you want to change the communication mode set in the PLC link to
another mode, download the changed project to the CPU unit in FPWIN GR7,
and turn on power to the FP7 CPU unit again.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Settings when the PLC link
function is used
PLC link
1 - 16
115200 bps
8 bit
Odd
1 bit
Invalid
0
Invalid
CR
0
Do not initialize
Setting range
0 or 1
0 to 16
0 to 64 words
0 to 128 words
0 to 63
0 to 64 words
0 to 127
0 to 127 words
4.2 Configuration Required for PLC Link
Remark
Set a specific station no. for PLC to be
connected to the PLC link.
Regardless of settings in FPWIN GR7,
the FP7 CPU unit itself performs automatic
settings.
Setting method
Specify the device No. range for link relays
and link registers to be used in a block.
Set the Max. station no. for PLC to be
connected to the PLC link.
Specify the device No. range for link relays
and link registers to be used.
4-5