General Information - TDK-Lambda GENESYS User Manual

Usb interface

Hide thumbs Also See for GENESYS:

Table of Contents

1. General Information

The Universal Serial Bus (USB) option for the Genesys

program, measure and check status of the power supply. It uses a USB connection like those commonly used to

connect computers to many types of equipment.

Communication is achieved by installing USB drivers and making the USB connection to the power supply.

There are two types of USB drivers available:

A). Drivers that will make the USB connection appear as a new serial port in your computer.

B). Library files to allow a program to directly connect to the USB without creating a new serial port.

The USB command set, capabilities and speeds are identical to the RS-232/485 command set. This is described

in detail in the User Manual for the Genesys™ product line.

Although communicating through the USB can be as simple as typing commands into a terminal program

(example: Windows HyperTerminal), TDK-Lambda also provides a variety of drivers, example programs and

support for the USB.

series power supply allows the user to remotely

83-033-800 Rev A

Table of Contents

Do you have a question about the GENESYS and is the answer not in the manual?