Table of Contents
Advertisement
4.3 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the panel PC does not fall down and get damaged.
Three methods of mounting the IOVU-751R-CE5/UX-R10 are listed below.
Wall mounting
Panel mounting
Arm mounting
The three mounting methods are described below.
4.3.1 Wall Mounting
To mount the IOVU-751R onto the wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 4-9).
Page 30
IOVU-751R-CE5/UX-R10 User Manual
Advertisement
Table of Contents
