Anti-Static Precautions; Unpacking; Unpacking Precautions - IEI Technology IOVU-751R-CE5/UX-R10 User Manual

3.1 Anti-static Precautions

WARNING:
Failure to take ESD precautions during the installation of the
IOVU-751R-CE5/UX-R10 may result in permanent damage to the
IOVU-751R-CE5/UX-R10 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-751R-CE5/UX-R10. Dry climates are especially susceptible to ESD. It
is therefore critical that whenever the IOVU-751R-CE5/UX-R10 or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the IOVU-751R-CE5/UX-R10,
place it on an antic-static pad. This reduces the possibility of ESD damaging
the IOVU-751R-CE5/UX-R10.

3.2 Unpacking

3.2.1 Unpacking Precautions

When the IOVU-751R-CE5/UX-R10 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 3.1.
Make sure the packing box is facing upwards so the IOVU-751R-CE5/UX-R10
does not fall out of the box.
Make sure all the components shown in Section 3.3 are present.
Page 16
IOVU-751R-CE5/UX-R10 User Manual
board, touch any grounded conducting