Table of Contents
Advertisement
Step 3:
Align the retention screw holes on the mounting arm interface with those on
theIOVU-751R, as shown in Figure 4-15.
Figure 4-15: Arm Mounting Retention Screw Holes
Step 4:
Secure the IOVU-751R to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the IOVU-751R.
Step 0:
4.3.4 Stand Mounting
The IOVU-751R has Video Electronics Standards Association (VESA) standard mounting
holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA
hole pattern. To mount the IOVU onto a stand, please follow the steps below.
Step 1:
Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor stand mounting plate.
Step 2:
Secure the monitor to the stand with the supplied retention screws (Figure
4-16).Step 0:
Page 36
IOVU-751R-CE5/UX-R10 User Manual
Advertisement
Table of Contents
