Technical Specifications - Nice RD400 Instructions And Warnings For Installation And Use

13

TECHNICAL SPECIFICATIONS

All technical specifications stated herein refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.A. reserves the right to modify its products
at any time deemed necessary, while nonetheless maintaining the same intended use and functionality.
ROAD (RD400)
Product type
Pinion
Maximum inrush torque
Nominal torque
Speed (no load)
Nominal torque speed
Maximum frequency of operating cycles
Maximum continuous operating time
RD400 power supply
RD400/V1 power supply
Fuses
Maximum power input
Insulation class
Warning light output
STOP input
Step-by-Step input
Radio ANTENNA input
Radio receiver
Programmable functions
Auto-recognition functions
Operating temperature
Protection rating
Dimensions and weight
RADIO RECEIVER
Product type
Frequency
Coding
Transmitter compatibility *
Memorisable transmitters
Input impedance
Sensitivity
Transmitter range
Outputs
Operating temperature
* the first transmitter that is inserted also determines the type of those introduced subsequently.
Electromechanical gearmotor for the automatic movement of sliding gates for residential use,
inclusive of electronic control unit
Z: 15; Module: 4; Pitch: 12.5 mm; Primitive diameter: 60 mm
12 Nm; corresponding to the capacity to move a leaf with a static friction of up to 400 N
5 Nm; corresponding to the capacity to keep a leaf moving with a dynamic friction of up to
167 N
0.25 m/s; the control unit allows for programming speeds of: 0.13 m/s or 0.25 m/s
0.16 m/s
50 cycles per day (the control unit limits the cycles to the maximum specified in Tables 1 and 2)
9 minutes (the control unit limits continuous operation to the maximum values given in Tables 1
and 2)
230 V (+10% +15%) 50/60 Hz
120 V (+10% +15%) 50/60 Hz
F1: 1 A Type T (250 V) - F2: 2 A Type T (250V)
210 W (1.1 A)
1 (a safety earthing system is required)
For 1 ELDC flashing LED
For normally closed, normally open or 8.2 kΩ fixed resistance contacts; with self-recognition
(any variation from the memorised status triggers the "STOP" command)
For normally open contacts (closing of the contact triggers the Step-by-Step command)
52 Ω for RG58 or similar type cable
Incorporated
3 ON-OFF functions and 3 adjustable functions (see Tables 13 and 15)
Self-recognition of the type of "STOP"
Self-recognition of the gate opening and closing positions and calculation of the slowdown and
partial opening points
–20°C ... +55°C
IP 44
330 mm x 195 mm x h 277 mm; 8 kg
4-channel receiver for incorporated radio remote control
433.92 MHz
52-bit FLOR-type digital rolling code
64-bit SMILO-type digital rolling code
Supported protocols: Flor, O-Code, Smilo
Up to 100 if memorised in Mode 1
52 Ω
better than 0.5 µV
From 100 to 150 m; this range can vary if there are obstacles or electromagnetic disturbances,
and depends on the position of the receiving antenna
For the commands see Tables 4 and 5
–20°C ... +55°C
English – 23