Product Disposal; Product Technical Specifications - Nice RMKIT Series Instructions And Warnings For Installation And Use

5
WHAT TO DO IF... (troubleshooting guide)
If, when powering a phase (that is, commanding an upward
or downward movement), the motor does not move, per-
form the following checks.
1) Check whether there is mains voltage and if it matches the val-
ues mentioned in the "Technical specifications" chapter.
2) Check whether the two limit switches activate simultaneous-
ly due to incorrect adjustment; in this case, turn the two limit
switch adjustment screws a few times, each in the direction of
the "+" sign.
3) Check whether the "thermal self-protection" function is active;
in this case, simply wait fore the motor to cool down.
Note – This motor is designed for residential use, therefore
6
MAINTENANCE
Maintenance must be performed in strict observance of
the safety provisions in this manual and according to cur-
rent legislation and standards.
7

PRODUCT DISPOSAL

This product is an integral part of the automation and
therefore must be disposed together with the latter. • As
when installing the product, once the product reaches the end
of its useful life, it must be dismantled by a qualified technician.
• This product is made up of different types of material, some of
which can be recycled while others must be disposed of. Seek
information on the recycling and disposal systems required by lo-
cal regulations in your area for this product category. • Caution!
– certain parts of the product may contain polluting or hazard-
ous substances that, if released into the environment, may seri-
ously damage the environment and human health. • As indicated
8

PRODUCT TECHNICAL SPECIFICATIONS

WARNINGS • All technical specifications reported herein refer to
an ambient temperature of 20°C (± 5°C) • Nice S.p.A. reserves
the right to modify the product whenever it deems it necessary,
without this implying any alteration of its functions and intend-
ed use.
• Supply voltage and frequency, current and power, tor-
que and speed: see technical data on the product's rating
plate.
for intermittent service. It nonetheless guarantees continuous
operation for up to 4 minutes and, should it overheat (for ex-
ample, due to continuous and prolonged operation), a thermal
self-protection function automatically intervenes to cut off the
power supply and restores it when the temperature returns to
its normal values.
––––––––
If, after these checks, the motor does not move, contact a quali-
fied technician or the Technical Assistance Service.
The automation's devices do not require special maintenance;
however they should be checked periodically (at least every six
months) to ensure their full efficiency.
by this symbol, the product may not be disposed of
as domestic waste. Separate the waste into catego-
ries for disposal, according to the methods set out by
legislation in force in your area, or return the product
to the retailer when purchasing a new version. • Caution! – local
regulations may include the application of heavy fines in the event
of improper disposal of this product.
• Motor diameter: 45 mm
• Nominal continuous operating time:
maximum 4 minutes
• Protection rating: IP 44 (tubular motor)
• Minimum operating temperature: -20°C
• Length of the connection cable: 2.5 m
English – 8