Section 1 Specifications - Hach sc100 User Manual

Section 1
Component Description
Controller Operating
Temperature
Controller Storage
Temperature
Enclosure
Power Requirements
Pollution Degree/
Installation Category
Outputs
Relays
Controller Dimensions
Controller Weight
Certifications
Specifications
Specifications are subject to change without notice.
Microprocessor-controlled measuring unit with measured value display, temperature
display, and menu-driven system
–20 to 60 °C (–4 to 140 °F); 95% relative humidity, non-condensing with sensor/network
card load <7 W; –20 to 40 °C (–4 to 104 °F) with sensor /network card load <25 W
–20 to 70 °C (–4 to 158 °F); 95% relative humidity, non-condensing
NEMA 4X/IP66 metal enclosure with a corrosion-resistant finish
AC Powered sc100 model: 100–230 VAC ±10%, 50/60 Hz; Power 15 W with 7 W
sensor/network card load, 37 W with 25 W sensor/network card load
24 VDCpowered sc100 model: 24 VDC –15%, +20%; Power 16W with 7W
sensor/network card load, 34 W with 25 W sensor/network card load
II; II
Two (Analog (4–20 mA)) outputs, maximum impedance 500 ohm. Optional digital network
connection. IrDA digital connection.
Three SPDT, user-configured contacts rated 100–230 VAC, 5 Amp resistive maximum for
the ac powered sc100 and 24 VDC, 5A resistive maximum for the dc powered sc100.
½ DIN—144 x 144 x 150 mm (5.7 x 5.7 x 5.9 inches)
1.6 kg (3.5 lb)
CE approved (with all sensor types)
Listed for use in general locations to UL and CSA safety standards by ETL (with all sensor
types)
Listed for use in Class I, Division 2 hazardous locations to FM & CSA safety standards by
ETL (with specified sensor types, per Control Drawing 58600-78
5