Release Outputs; Relay Options; Navigating To The Relay Options Menu; Data Event Logging Options - Hach sc100 User Manual

4.5.3 Release Outputs

Step Select
1
2
3
4
5
6

4.6 Relay Options

4.6.1 Navigating to the Relay Options Menu

Step Select
1
2
3
4
5
6

4.7 Data Event Logging Options

During calibration, analog outputs can remain active, held, or transferred to a preset mA
value.
Main Menu or Main Measurement Screen
Refer to System Setup on page 31
Customize the options, refer to
Main Menu or Main Measurement Screen when Relay options are configured.
The sc100 provides three data logs (one for each sensor and one for calculated values)
and three event logs (one for each sensor and one for the controller). The data logs store
the measurement data at selected intervals. The event log stores a variety of events that
occur on the devices such as configuration changes, alarms, and warning conditions. The
data logs are stored in a packed binary format and the event logs are stored in a CSV
format. The logs can be downloaded through the digital network port, the IrDA port, or
through the service port using the service cable LZX887.
Menu Level
MAIN MENU
TEST/MAINT
HOLD OUTPUTS
ACTIVATION
RELEASE
for more information on the relay options menu.
Menu Level/Instructions
MAIN MENU
SYSTEM SETUP
RELAY SETUP
SELECT RELAY
System Setup on page
Operation
Confirm
—
—
Confirm
—
31.
—
35