Output Options; Navigating To The Output Options Menu; Hold/Transfer Outputs - Hach sc100 User Manual

Operation

4.5 Output Options

4.5.1 Navigating to the Output Options Menu

Step Select
1
2
3
4
5
6

4.5.2 Hold/Transfer Outputs

4.5.2.1 Hold/Transfer Outputs until Release
Step Select
1
2
3
4
5
6
7
8
9
10
34
Refer to the System Setup on page 31
The analyzer provides two isolated analog outputs (Output 1 and Output 2).
Customize the options, refer to
Main Menu or Main Measurement Screen when Output options are configured.
During normal measurement operation, the analog outputs can be held at the
last measured value or transferred to a preset value.
Select HOLD OUTPUTS or XFER OUTPUTS
Select ALL or one of the connected sensors.
Main Menu or Main Measurement Screen
for more information on the output options menu.
Menu Level/Instructions
MAIN MENU
SYSTEM SETUP
OUTPUT SETUP
SELECT OUTPUT
System Setup on page
Menu Level/Instructions
MAIN MENU
TEST/MAINT
HOLD OUTPUTS
SET OUTMODE
SET CHANNELS
ACTIVATION
Select LAUNCH
Confirm
—
31.
—
Confirm
—
—
reading
will flash