Specifications; General Information - Hach SC4200c User Manual

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (W x H x D) ½ DIN—144 x 144 x 192 mm (5.7 x 5.7 x 7.6 in.)
Weight
Enclosure
Operating temperature
Storage temperature
Relative humidity
Altitude
Installation category
Pollution degree
Protection class
Power requirements
Measurement
Relays high voltage
Outputs (optional)
Digital communication
2
Network connection
USB port
Compliance information
Warranty

General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer's website.
1
Refer to the module documentation for additional information.
Note: Connect only one module to one of the available slots.
2
The type of connection is dependent on controller configuration.
Details
1.7 kg (3.7 lb) (Controller weight without optional modules)
NEMA 4X/IP66 metal enclosure with a corrosion-resistant finish
–20 to 60 °C (–4 to 140 °F); Cellular version: –20 to 55 °C (–4 to 131 °F)
–20 to 70 °C (–4 to 158 °F)
0 to 95%, non-condensing
2000 m (6562 ft) maximum
II
2
I, connected to protective earth
100–240 VAC ±10%, 50/60 Hz; 0.5 A (7 Watt sensor load)
Two device digital SC connectors
Two relays (SPDT); Maximum switching voltage: 250 VAC; Maximum switching
current: 5 A (resistive only load); Maximum switching power: 1250 VA, 125 W
(resistive only load); Wire gauge: 0.75 to 2.5 mm
Five 4–20 mA analog outputs on each analog output module
Analog input (0–20 mA or 4–20 mA) on each analog input module
1
Profibus DPV1 card (optional), Modbus TCP/IP
LAN version: Two Ethernet connectors (10/100 Mbps), switch function, M12 female D-
coding connector; Cellular version (optional): SIM card (3G/4G); WiFi version
(optional)
Used for data download and software upload. The controller records approximately
20,000 data points for each connected sensor.
CE. ETL certified to UL and CSA safety standards (with all sensor types).
1 year (EU: 2 years)
2
(18 to 12 AWG)
1
English 3