Table of Contents
Advertisement
3.2 System Startup/Shutdown and Image
Reading (Console)
The startup and shutdown of the FCR PRIMA T2 (CR-IR 392) is performed under the control of the
Console's power ON/OFF switch.
To start up only the FCR PRIMA T2 (CR-IR 392), use the procedure described in [3.3 Starting Up/
Shutting Down the FCR PRIMA T2 Main Unit]. In sections coming hereafter where the system
operation is explained, the "FCR PRIMA T2 (CR-IR 392)" is expressed simply as "FCR PRIMA T2."
* In case of using the console other than the one of CR-IR 391CL, refer to the manual attached to the
console.
3.2.1 Starting Up the System
1
Confirm that the power/erasing mode
3
indicator lamp on the FCR PRIMA T2's
operation panel is on.
If the power/erasing mode indicator lamp is not lit,
turn ON the main power switch.
Status when initialization has been
completed and the console is not
yet connected
Console unconnected:
2
Firstly, press the power ON/OFF switch of
the Console's monitor, and secondly press
the power ON/OFF switch of the Console
itself.
The Console's application software starts.
3-2
FCR PRIMA T2 Operation Manual
Power/Erasing Mode
Indicator Lamp
897N102546
When start of the console application software has
been completed, the user selection screen is
displayed. When FCR PRIMA T2 becomes
connected by console operation, the status display
LED of the FCR PRIMA T2 operation panel changes
from console not connected status to console
connected status. When study is started from the
console, the cassette ready lamp (green) lights.
Status when the console has been
connected and study has been
started
Status Display
Cassette Ready Lamp
LED
Console connected:
Hide quick links:
Advertisement
Table of Contents
