Enabling The Usb Port - Lexmark CS921 User Manual

Troubleshooting
Action
Step 6
Check if the web proxy servers are disabled.
Are the web proxy servers disabled?
Step 7
Access the Embedded Web Server.
Did the Embedded Web Server open?
Unable to read flash drive
Action
Step 1
Check if the flash drive is inserted into the front USB port.
Note: The flash drive does not work when it is inserted into the
rear USB port.
Is the flash drive inserted into the correct port?
Step 2
Check if the flash drive is supported. For more information, see
"Supported flash drives and file types" on page
Is the flash drive supported?
Step 3
a
Check if the USB port is enabled. For more information, see
"Enabling the USB port" on page
b
Remove, and then insert the flash drive.
Does the printer recognize the flash drive?

Enabling the USB port

From the home screen, touch Settings > Network/Ports > USB > Enable USB Port.
Checking the printer connectivity
1
From the home screen, touch Settings > Reports > Network > Network Setup Page.
2
Check the first section of the network setup page, and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.
27.
88.
Yes No
Go to step 7. Contact your
administrator.
The problem is Contact
solved. support.
Yes No
Go to step 2. Insert the flash drive
into the correct port.
Go to step 3. Insert a supported
flash drive.
The problem is Contact
solved. support.
88
customer
customer