Braised Lamb Shanks - NuWave Nutri-Pot 13Q Owner's Manual & Complete Recipe Book

Braised Lamb Shanks

Ingredients:
12 lamb shanks
Salt and freshly ground black pepper
to taste
1 cup flour
8 tablespoons olive oil
2 yellow onions, chopped
2 ribs celery, diced small
2 medium carrots, diced small
4 cloves garlic, smashed
Directions:
1. Place flour in a shallow, wide dish.
2. Season lamb with salt and pepper and dredge in flour to coat well.
3. Press "sear", set to 20 minutes, and press "start/stop".
4. Add olive oil to cooker. Working in batches, sear lamb on all sides until
dark brown; set aside in covered dish.
5. Add carrots, celery, onions, garlic, and tomato paste and sauté.
6. Add red wine to Pressure Cooker and deglaze any bits off the bottom.
7. Add stock, juices, zests, bay leaves, spices, and lamb.
8. Close lid and lock.
9. Press "meat/stew", set to 1 hour and 10 minutes, and press "start/stop".
10. When done, the pressure cooker will automatically go to the "warm"
feature and the pressure will release naturally. Turn the Pressure Release
Switch to "Release" until all pressure is released.
11. Carefully open lid, season lamb, remove the meat and set aside.
12. Press "sear", set to 10 minutes, and press "start/stop" to thicken sauce.
13. Once sauce has thickened, pour over lamb and garnish with parsley.
Tip: Use beef stock in place of red wine.
Serves: 8-12
6 tablespoons tomato paste
4 cups red wine
3 cups beef stock
4 bay leaves
2 teaspoons dried thyme
1 teaspoon dried oregano
2 oranges, juiced and zested
2 lemons, juiced and zested
fresh parsley, chopped
45
Recipes