Assembly Instructions - Kasco 8400JF Owner's Instructions Manual

Control Panel in separate box (1) (if purchased)
Set of Interchangeable Nozzles (5) (Diagrams)
# Item
1 #6 x 1/2" Self Tap Screw
2 3/8" x 4" bolt
3a Linden Nozzle (2, 3 HP)
3b Linden Nozzle (5 HP)
3c Linden Nozzle (7.5 HP)
4a Redwood Y Insert (2 HP) (in #7) 820170 1
4b Redwood Y Insert (3 HP) (in #7) 820332 1
4c Redwood Y Insert (5 HP) (in #7) 820352 1
5 Juniper Nozzle
6 Willow Nozzle
7a Redwood/Spruce Nozzle (2 HP)
7b Redwood/Spruce Nozzle (3 HP)
7c Redwood/Spruce Nozzle (5 HP)
8a Sequoia Nozzle (5 HP)
8b Sequoia Nozzle (7.5 HP)
9 3/8" x 2.5" Bolt
8400JF, 3.1JF, 2.3JF, 3.3JF Nozzle Diagram
5.1JF, 5.3JF Nozzle Diagram
7.3JF Nozzles include linden and sequoia.
NOTE: Extra hardware may be included.
Tools & Supplies Needed
• Anchors or stakes for installing unit (3)
• Philips head screw driver for mounting C-85
• Electrical Supply near pond on a post with room
for mounting the control panel
• Three 12" galvanized pipe for weighting ropes
(optional)
4
• #10 x 1" long or longer screw(s) for mounting the
control panel (4)
• 7/16" Socket & Wrench (1)
• 7/16" Wrench (1)
Part # Qty
• 9/16" Socket & Wrench (1)
820405 3
• 9/16" Wrench or adjustable crescent wrench (1)
820090 1
• Flat head screw driver (1)
820110 1
820109 1
703320 1
1. Remove all contents from package and place on
a clean, flat surface. Inspect the shipment for any
damages. If damages are found, immediately notify
820140 1
your carrier and your Kasco Marine, Inc. representa-
820150 1 tive. Next, cross reference the parts included in the
shipment with the Parts Included sheet in this manual.
820160 1
Make sure you have all the parts needed. If any short-
820330 1
ages are found, contact your Kasco representative
820350 1
immediately.
820130 1
703200 1
2. Arrange the three Float Sections (Part #B1) upright
820095 1
(plug on bottom) so the overlap of one section aligns
with the next section and loosely push the three sec-
tions together to form a continuous ring.
8400JF, 3.1JF, 2.3JF, 3.3JF
5.1JF, 5.3JF, 7.3JF

Assembly Instructions