Optional Premium Nozzles - Kasco 8400JF Owner's Instructions Manual

The Willow nozzle (marked W on the inside of the
cone) uses the 3/8" x 4" bolt
Model HP
8400, 2.3 2
3.1, 3.3 3
5.1, 5.3 5
The Juniper nozzle (marked with J on in inside of the
nozzle cone) uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
5.1, 5.3 5
The Spruce nozzle uses the three self tapping screws
to attach over the pump housing and the Y Insert must
be removed.
Model HP
8400, 2.3 2
3.1, 3.3 3
5.1, 5.3 5
8
Height Width
12.5' 28'
13' 35'
14' 36'
Height Width
8' 46'
9' 48'
10' 50'
Height Width
19' 10'
21' 13'
24' 15'
The Birch display does not use a nozzle or bolt. It is
the aerator unit running without any nozzle and allows
for the best flow rate and oxygen transfer!
Model HP
8400, 2.3 2
3.1, 3.3 3
5.1, 5.3 5
7.3 7.5
The Sequoia nozzle (marked S on the inside of the
cone) uses the 3/8" x 2.5" bolt.
5.1JF, 5.3JF ONLY
Model HP
5.1, 5.3 5
7.3 7.5

Optional Premium Nozzles

The following are optional premium nozzles available
for the J Series Decorative Aerators. Premium nozzles
offer splendid beauty above and beyond our included
patterns.
Madrone Premium Nozzle:
Height Width
12' 11'
14.5' 10'
14' 12'
14.5' 13'
Height Width
21' 10'
26' 10'