Installation Instructions - Kasco 8400JF Owner's Instructions Manual

Magnolia Premium Nozzle:
Palm Premium Nozzle:
Mahogany Premium Nozzle:
Contact your authorized Kasco distributor or visit
www.kascomarine.com for more information.

Installation Instructions

Before installing 3 phase units (2.3, 3.3, 5.3, 7.3) into
the pond, please refer to 3 phase startup procedure.
Use the ropes to position the aerator in the desired
location in the pond/lake. Anchor the ropes or secure
them to the shoreline so the ropes are free of slack, but
not tight. To prevent twisting of the unit due to torque,
you should place the anchor at least 3 feet from the
float for each foot of depth (Ex. A 6 foot deep pond
would require an anchor 18 feet horizontally from the
float.)
For ease of removal, you may choose to keep at least
one anchor within reach from shore, just below the
water's surface.
(ALTERNATE INSTALLATION)
In ponds where the water level fluctuates significantly,
you may need to suspend a small weight (12" of 1"
galvanize pipe works well) at the mid-point of the
rope to take up any slack as the water level drops. The
weight should be light enough so the aerator can rise
as the water level rises. This can also help hide ropes
by sinking them further below the surface.
9