Connecting Devices To The Video Converter - StarTech.com VCSVIDVGA Instruction Manual

VCSVIDVGA.qxd 7/21/05

Connecting Devices to the Video Converter

Rear Panel
1. Disconnect your high-resolution display from its existing video connection.
2. Disconnect your video source (i.e. DVD player) from its existing video connection.
3. Place the video converter near the video source and connect the power adapter to a
suitable wall outlet. Connect the opposite end to the DC 5V connector on the rear of
the video converter.
4. Connect the cable you used to connect your video source to its previous video display
(usually labeled as VIDEO OUT, or similar) as removed in step 2 to the YCbCr IN,
SV IN, or CV IN connector on the rear of the video converter as appropriate. The
connector you use will depend on the type of cable the video source uses. If your
device uses a YCbCr cable, you will need to use the provided adapter to convert the
connectors to the 8-pin DIN connector on the YCbCr IN port on the video converter.
5. Using the provided HD-15 male/male VGA cable, connect one end to the PC/HD
OUTPUT port on the front panel of the video converter.
6. Connect the opposite end of the VGA cable to the VIDEO IN (or similar) connector
that you removed in step 1.
5:00 PM Page 3
Front Panel
3