Table of Contents
Advertisement
VCSVIDVGA.qxd
7/21/05
6
Troubleshooting
Problem: I can't see an image from the video source or the OSD.
Cause: The input setting or output timing (resolution and refresh rate) is incorrect.
Resolution: a) Adjust the settings back to the default setting for your display type
(see page 4) and reselect the input type as necessary.
b) Ensure all cables are securely connected in the proper connectors.
Problem: The image is distorted or blurry.
Cause: The output timing settings/image quality settings are not optimized, or there is
interference degrading the cable signal.
Resolution: a) Adjust the timing settings and image settings using the menu system to
improve image quality and ensure the video source is working normally.
b) Use the shortest cable length possible, and ensure that they are of a high
quality. Heavily-shielded cables with gold-plated connectors offer superior
performance and signal protection. Do not use converters or extension
cables unless they were supplied with the video converter.
5:00 PM
Page 6
Advertisement
Table of Contents
