Agilent Technologies 1100 Series Service Manual page 18

1 Installing the Pump
Table 2
Description
Wrench open end 1/4 - 5/16 inch (x1)
Wrench open end 14 mm (x 1)
Wrench open end 4 mm, (x 1)
Hex key 2.5 mm, 15 cm long, straight handle (x 1)
Hex key 3.0 mm, 12 cm long (x 1)
Hex key 4.0 mm, 15 cm long, T handle (x 1)
Torque adapter
CAN cable (1 m long)
Purge valve assembly
Purge valve holder
Screw for the purge valve holder
FS to Inj valve cap. (350 mm, 25 µm)
FS to Inj valve cap. (550 mm, 25 µm)
Flow sensor accuracy calibration capillary (8000 mm, 25 µm)
ESD wrist strap
6
Nano Pump Accessory Kit Content G2226-68705, continued
Part Number
8710-0510
8710-1924
8710-1534
8710-2412
8710-2411
8710-2392
G1315-45003
5181-1519
G1311-60009
G1312-23200
0515-0175
G1375-87322
G1375-87323
G2226-67300
9300-1408
1100 Series Nano Pump Service Manual