Owners Manual & Maintenance - Kane KANE504 Owner's Manual & Maintenance Manual

OWNERS MANUAL & MAINTENANCE
The KANE504 Flue Gas Analyser tests heating appliances for carbon
dioxide (CO ), carbon monoxide (CO), Flue Temperature and
2
Combustion Efficiency.
It is suitable for use with all common 'domestic' fuels including Natural
Gas, Propane, Heavy Oil, LPG and Light Oil. (When used with oil
burning appliances the flue gases should only be sampled after the
smoke level has been measured and has been confirmed to be a very
low smoke number.)
It uses a bespoke Non-Dispersive InfraRed (NDIR) sensor to directly
measure CO and a long life electrochemical sensor to measure CO.
2
The meter is controlled using a rotary dial.
The dial positions are:
OFF
STANDBY
CO
CO
2
O
2
RATIO
T FLUE
EFF
Note: Ratio is shown to 4 decimal places, but without a decimal point. So
0001 on the display is equivalent to 0.0001
Pump off
ppm carbon monoxide
% carbon dioxide
% Oxygen
CO/CO2
Flue temperature
Combustion Efficiency
- 3 -