Table of Contents
Advertisement
WORKING CONDITIONS
Supply voltage
(240V model)
(120V model)
Supply Frequency
Max. power
Max. Relative Humidity
Main Fuse
Ambient Temperature
Altitude
Protection
Pollution Degree
Dimensions
Size
Weight
Logging period
Measurement period
Sample rate
PHASER
Power
Size
MAINTENANCE AND CLEANING INSTRUCTIONS
The jaw faces of the current clamps must always be clean. Clean them regularly and keep
them lightly oiled to avoid oxidation.
Do not leave the clamp in damp conditions and never expose it to running water.
Clean the handle and casing with a cloth moistened with a light detergent, use a cloth slightly
moistened with clean water to remove residues. Dry with clean soft cloth, never expose the
clamp to running water.
After cleaning leave overnight in a warm room to ensure that all moisture evaporates.
HAWK 5000 OPERATOR MANUAL
180 to 260 V AC
90 to 130 V AC
(not to exceed +10% of the nominal voltage)
40 Hz - 65Hz
20 VA
80% for temperature up to 31°C decreasing linearly to
50% relative humidity at 40°C
100 mA Anti-surge
5 to 40 degrees C
Indoor use up to 2000m
IP20
2
282 x 222 x 64 mm
1.8 Kg (without accessories)
Programmable: 2 secs to 2 hours
2 secs to 11 secs
(depends on logging period)
10000 samples per second
9 volt battery( PP3 type)
200 x 35 x 31 mm
KANE INTERNATIONAL LIMITED
16
Advertisement
Table of Contents
