Maintenance; 7:1 General Maintenance - Kane AUTO600 Manual

Time: Press the "ENTER" key to access and "UP" or
"DOWN" to adjust. "ENTER" key confirms setting.
Date: Press the "ENTER" key to access and "UP" or "DOWN"
to adjust. "ENTER" key confirms setting.
CalFiltr: To be only used if calibration verification is required
Follow procedure on page 27.
SerialNo: Each handset and base measuring unit has a
unique serial number to access press "ENTER" please use
this when registering your product www.kane.co.uk. The
serial number is also on the labels fitted to the base and
handset.
Language: Follow the on screen instructions to select the
language needed. Note that if the handset batteries are
allowed to run down the language selection will revert to the
default, English.
ZeroSmke: Press 'ENTER' key to select this function which zeros
the smokemeter. Follow the on screen instructions to set the
process running, ensuring the smoke probe has been removed from
the exhaust of the vehicle and is in fresh air.

7: Maintenance

7:1 General Maintenance

Check calibration of your instrument annually to ensure it meets
original performance specifications.
Keep your instrument dry. If it gets wet, wipe dry immediately.
Liquids can degrade electronic circuits.
Whenever practical, keep the instrument away from dust and dirt
that can cause premature wear.
Although your instrument is built to withstand the rigours of daily
use, it can be damaged by severe impacts. Use reasonable caution
when using and storing the meter.
Page 17