Ramp/Soak Activation Pattern (Step No.); Setting The Ramp/Soak Activation Pattern - FujiFilm PXG4 Operation Manuals

Ramp/Soak Activation Pattern
SV
step1
SV-1
step1 to 4 : pattern 0
Chapter
6
The 16-step ramp/soak patterns are divided into seven
types, any one of which can be used.
• Range 0: Steps 1 to 4
1: Steps 5 to 8
2: Steps 1 to 8
3: Steps 9 to 12
4: Steps 13 to 16
5: Steps 9 to 16
6: Steps 1 to 16
Do not change this parameter during ramp/soak
Caution
operations. Make sure that
changes.

Setting the Ramp/Soak Activation Pattern

The following steps explain how to set the ramp/soak activation
pattern by using steps 1-4 as an example.
Operation mode
Press and hold the
1
("M M M M v v v v 1 1 1 1 ").
The MV1 output of the monitoring mode is displayed.
step4
step2 step3
step5 step6
SV-3
SV-4
SV-2
SV-5
step5 to 8 : pattern1
step1 to 8 : pattern 2
" " " "
PrG = oFF
key to display Mv1
step7
step8 step9 step10
SV-8
SV-9
SV-7
SV-10
SV-6
step9 to 12 : pattern 3
step1 to 8 : pattern 6
Press and hold the
2
mode channel menu ("o o o o P P P P E E E E C C C C h h h h 1 1 1 1 "), then use the
Set the ramp/soak menu.
Press and hold the
3
keys to display PTn ("P P P P T T T T n n n n ").
Select an activation pattern.
before making
Press the
4
select 0 when the bottom part of the display
begins to blink.
Pattern 0 is selected.
Press the
5
Press the
6
PV/SV display.
– 56 –
step11 step13
step12 step14
SV-13
step15
SV-12
SV-14
SV-11
step13 to 16 : pattern 4
step9 to 12 : pattern 5
key to display the setup
keys to display PrG ("P P P P L L L L T T T T C C C C h h h h 4 4 4 4 ").
key, the use the
key, then use the
key to confirm the setting.
key to return to the operation mode
step16
SV-15
SV-16
time
keys to