Do Output Latch Cancel; Canceling The Do Output Latch; Sv No. Switch; Changing Sv Number - FujiFilm PXG4 Operation Manuals

DO Output Latch Cancel

The following steps will cancel the DO Latch.
• Range: oFF
rST (latch reset)
• See "DO option Functions" (p. 98) for more information on DO
Refer to
latch settings.
• See "DI Functions Select" (p. 94) for more information on
releasing the latch with DI.
Chapter

Canceling the DO Output Latch

3
Press and hold the
1
menu of the setting mode, then use the
keys to display "o o o o P P P P E E E E C C C C h h h h 1 1 1 1 ".
Refer to
See p. 23 in this chapter for information on how to display
the channel menu.
Press and hold the
2
keys to display "LACh" ("L L L L A A A A C C C C h h h h ").
Press the
3
display "rST" when the bottom part of the display
begins to blink.
Press the
4
The following steps will cancel the DO Latch.
Press the
5
of the operation mode.
key to display the channel
key, then use the
key, then use the
key to confirm the setting.
key to return to the PV/SV display

SV No. Switch

This function changes an SV No. previously set to a PID
palette. This allows SV to be changed easily.
• Range: Sv0, Sv1 ... Sv7, DI
Set the ramp SV when changing the SV to reduce frequency
of loss of control.
Refer to
See "Ramp SV decline, incline and slope time unit" (p. 99) for more
information on ramp SV.
Changing the SV number will not change the control
Caution
parameters (PID, etc).
When changing the SV value with the front panel key, do not
change the "Svn" parameter with communication. The
changed SV value may not be stored correctly.

Changing SV Number

Press and hold the
1
menu of the setting mode, then use the
keys to display "o o o o P P P P E E E E C C C C h h h h 1 1 1 1 ".
Refer to
Press and hold the
keys to
2
keys to display Svn ("S S S S v v v v n n n n ").
Change the SV number.
Press the
3
display "Sv3" when the bottom part of the display
begins to blink.
In this example, change to "Sv3".
Press the
4
The SV used for control is now set to "Sv3".
Press the
5
of the operation mode.
– 26 –
key to display the channel
See p. 23 in this chapter for information on how to display
the channel menu.
key, then use the
key, then use the
key to confirm the setting.
key to return to the PV/SV display
keys to