Out1 Upper/Lower Limits, Out2 Upper/Lower Limits; Setting Out1/Out2 Upper/Lower Limits - FujiFilm PXG4 Operation Manuals

This parameter specifies the upper and lower limits for
output control.
• Setting range
Output lower limit
OUT1 PLC1
OUT2 PLC2
Chapter
30 (sec)
4
PHC
output
PLC
0
Refer to
See "Setting Output Limiter Types" (p. 41) for more information on
setting limits.
OUT1 Upper/Lower
OUT2 Upper/Lower Limits
upper limit Setting range
PHC1 -3.0% to 103.0%
PHC2 -3.0% to 103.0%
(For TC=30 sec)
input
100 (%)
Limits,

Setting OUT1/OUT2 Upper/Lower Limits

Press and hold the
1
mode channel menu ("o o o o P P P P E E E E C C C C h h h h 1 1 1 1 "), then use the
keys to display Pid ("P P P P i i i i d d d d C C C C h h h h 2 2 2 2 ").
Refer to
See p. 31 in this chapter for information on how to display
the channel menu.
Press and hold the
2
use the
Specify the lower limit for OUT1.
Press the
3
the limit to 5.0.
The lower limit for OUT1 is set to 5.
Press the
4
Repeat steps 2-4 (excluding pressing and holding
5
the key) to set the upper limit for OUT1 and
the upper and lower limits for OUT2.
Press the
6
PV/SV display.
– 40 –
key to display the setup
key to display P ("P P P P "), then
keys to display PLC1 ("P P P P L L L L C C C C 1 1 1 1 ").
key, then use the keys to set
key to confirm the setting.
key to return to the operation mode