Unpacking And Erection - KERN DLB 160-3A Operating Instructions Manual

6.2 Unpacking and erection

Take the appliance carefully out of its packaging, remove the plastic jacket and
install it at the designated work space.
The appliance is supplied part-assembled. Immediately after unpacking check if the
delivered items are complete. Assemble the separate component parts according to
their sequence.
1.
2.
3.
4.
1. Put cover into the weighing chamber.
2. Put on the dish retainer carefully.
3. Position removal aid in a way that the handle fits under the groove of the
cover.
4. Put sample dish on the dish holder.
5. Level the appliance with the help of the foot screws until it is standing evenly.
14 DLB_A-BA-e-1110