Standstill Control Display - KERN DLB 160-3A Operating Instructions Manual

9.4

Standstill control display

 In weighing mode press the MENU button and keep it pressed until the acoustic
signal gets mute.
 Press MENU button repeatedly
 Acknowledge using PRINT button, the current setting is displayed.
 Use the navigation buttons   to select the desired setting.
Stab 1: Standstill control fast / very quiet set-up location
Stab 2: Standstill control fast + exact / quiet set-up location
Stab 3: Standstill control exact / very set-up location.
 Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings in the menu or go
back to weighing mode as follows.
 Press the MENU button and keep it pressed until the acoustic signal gets mute.
The balance returns automatically into weighing mode.
DLB_A-BA-e-1110 29