Dimension Drawings - Siemens SINAMICS S120 Configuration Manual

Dimension drawings

CAD CREATOR
The CAD CREATOR provides a user-friendly interface which helps you to find product-
specific data quickly and supports you in generating plant documentation containing project-
specific information.
Benefits
• Multilingual operator interface in English, French, German, Italian and Spanish included
• Dimension sheets with measurements in mm or inches
• Dimension sheets and 2D/3D CAD data for
The CAD CREATOR provides you with various options to begin with product configuration:
• Order number
• Order number search
• Geometric data
Once a product is successfully configured, the product-specific information, such as
dimension drawing and 2D/3D CAD data are displayed and made available for storing in
various formats, e.g.: *.pdf, *.dxf, *.stp oder *.igs.
The CAD CREATOR is available on CD-ROM and as an Internet application.
Additional information is available in the Internet under:
http://www.siemens.com/cad-creator
How up-to-date are the dimension drawings
Note
Siemens AG reserves the right to change the dimensions of the motors as part of
mechanical design improvements without prior notice. This means that dimensions drawings
can go out-of-date. Up-to-date dimension drawings can be requested at no charge from your
local SIEMENS representative.
Synchronous Motors 1FK7
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
– 1FT7/1FT6/1FK7 synchronous motors
– 1PH7/1PH4/1PM4/1PM6 asynchronous motors
– 1FT6/1FK7/1FK7-DYA geared motors
– 1FW3 torque motors
– 1FE1 built-in motors
8
177