Download  Print this page

Siemens SINAMICS S120 Configuration Manual Page 210

Synchronous motors.
Hide thumbs

Advertisement

Gearbox
9.3 Motors with helical and bevel gearboxes
Worm geared motor
Nominal ratio
Output torque
Max. perm. accelerating torque
Mechanical options
Configuring geared servo motors with the CAD CREATOR
The "CAD CREATOR" tool can be used to configure the geared servomotors and as a guide
to selection and ordering. This tool contains the relevant data and all dimension sheets.
The CAD CREATOR is available on CD-ROM (order number 6SL3075-0AA00-0AG0) and
as an Internet application.
You will find additional information on the Internet at:
210
I
9,2 to 70
norm 0 =
M
80 Nm to 430 Nm
2 =
M
96 Nm to 720 Nm
2max =
Solid shaft, hollow shaft with key, hollow shaft with
tensioning element/shrink disk, flange, mounting feet,
tapped hole group, torque bracket
http://www.siemens.com/cad-creator
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
Synchronous Motors 1FK7

Advertisement

   Also See for Siemens SINAMICS S120

This manual also for:

1fk7

Comments to this Manuals

Symbols: 0
Latest comments: