1FK702☐ to 1FK710☐ synchronous motors are available ex factory (SIEMENS) complete
with flange-mounted planetary gear.
The gearboxes assigned to the individual motors and gear ratios
motor/gearbox combinations are listed in the selection table. When making a selection,
the maximum permissible input speed of the gearbox must be observed (this is the same
as the maximum motor speed).
The motor/gearbox combinations listed in the selection tables are mainly intended for cyclic
operation S3 - 60% (ON period ≤ 60% and ≤ 20 min). Reduced maximum motor speeds and
output torques apply for use in S1 continuous duty (ON period > 60% or > 20 min).
The gearbox temperature may not exceed +90 °C
1FK7 synchronous motors must be designed with keyless motor shaft end, degree of
protection IP65 and anthracite paint finish for mounting onto the gearbox.
Synchronous Motors 1FK7
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
9.2 Motors with planetary gears
available for these