Siemens SINAMICS S120 Configuration Manual page 86

Motor components
6.4 Brake resistances (armature short-circuit braking)
Notice
When determining the run-on distance, then, for example, the friction (taken into account as
allowance in M
the contactors must be taken into consideration. In order to prevent mechanical damage,
mechanical end stops should be provided at the end of the absolute traversing range of the
machine axes.
Figure 6-7
86
)of the mechanical transmission elements and the switching delay times of
B
Armature short-circuit braking
Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
Synchronous Motors 1FK7