Table of Contents
Advertisement
1
Getting Started
RS232/RS422
To check the settings for the RS232 or RS422 interfaces press
Remote Interface Configure Interface
the respective softkey labels. Press
To change any setting:
1 Press
2 Select the parameter you want to change by pressing the softkey.
3 Use the
4 Press
To configure the power meter to use the serial RS232 or RS422 interfaces press
System
32
,
System
,
Remote Interface Configure Interface
and
the
and
keys to increase or decrease the value. Press
and save the new value. Pressing
to access the second page of the settings menu.
More
,
Remote Interface
,
Serial
to access the next menu page.
More
,
keys to select (highlight) the digit you want to change; use
Cancel
,
,
Select Interface
Keysight E4416A and E4417A Installation Guide
System
. The settings are displayed below
,
.
Serial
restores the previous value.
, or
.
RS232
RS422
,
to confirm
Enter
Advertisement
Table of Contents
