Function Test - Siemens SITRANS FUE950 Operating Instructions Manual

6.4

Function test

Before leaving the unit, check the following:
Flowmeter
1. Flowmeter is fitted correctly in direction of water flow (see relevant flowmeter operating
2. Flowmeter is placed in forward or return line section in accordance with position
3. Value of flowmeter pulse output is the same as value of energy meter pulse input.
4. Expected flow rate is within measuring range of SITRANS FUE950 calculator.
5. Temperature sensors are of the same pair.
6. Temperature sensors are wired correctly (including any cable extensions), installed
SITRANS FUE950
1. Pulse indicator is shown, and flow rate shown in display is normal and concordant with
2. Temperatures shown are within normal range and typical for the application.
3. T
4. No error indication is shown in display.
Test procedure
1. Check that pulse indicator is flashing regularly.
2. Check that no error function is indicated by a
3. Press
4. Press
Please fill in the following:
Commissioned
Date: ____________________________
Name: _______________________________________________________
Close and affix user seals to FUE950 cover (Page 49) and temperature sensor pockets
(Page 17), if applicable.
SITRANS FUE950 is now ready for use.
SITRANS FUE950
Operating Instructions, 01/2010, SFIDK.PS.022.F4.02
instructions).
information printed on energy calculator label (forward or return).
correctly, and mounted in correct sensor pockets.
connected flowmeter.
is higher than T .
H C
button briefly to check that all major functions display feasible values, e.g.
cumulative energy, cumulative water quantity, forward and return temperature.
button repeatedly to return arrow indicator to top "Err" and check that all
display segments are visible.
Operation (hardware)
symbol or a broken Pt sensor
6.4 Function test
.
47