Table of Contents
Advertisement
Note
Device installation is only to be performed by personnel qualified to handle electrical devices
of at least low voltage (up to 1000 V).
Disconnecting device
A switch or circuit-breaker shall be included in the building installation. It shall be in close
proximity to the equipment and within easy reach of the Operator. It shall be marked as the
disconnecting device for the equipment. Before removing the inner plastic cover the mains
power shall be switched off. After installing main power cable, the inner plastic cover has to
be installed with the two screws.
SITRANS FUE950
Operating Instructions, 01/2010, SFIDK.PS.022.F4.02
Safety notes
2.3 General requirements
9
Hide quick links:
Advertisement
Table of Contents
