Connecting
5.4 Add-on output and input modules
4. Position module to locating stud (L) between slot 1 and 2.
5. Push as far as the stop and screw tight with the recessed head screw (F).
6. Close lid and check meter for correct operation by pressing push button. Renew label
7. Functions and settings can be checked via display menus 3 and 4 and freely
36
seal of housing lid if meter functions correctly.
programmed using a software tool and the IrDA interface.
L
F
Operating Instructions, 01/2010, SFIDK.PS.022.F4.02
SITRANS FUE950